pgelog 1.0.2
- This Release
- pgelog 1.0.2
- Date
- Status
- Stable
- Abstract
- Enhanced PostgreSQL error logging extension
- Description
- pgelog enables logging into a database table using pseudo-autonomous transactions via dblink. Logs survives even on rollback. To optimize performance, dblink connection is cached to pg_variables.
- Released By
- anfiau
- License
- PostgreSQL
- Resources
- Special Files
- Tags
Extensions
README
pgelog - extended logging by pseudo-autonomous transactions via dblink into log table
Introduction
The pgelog extension enables reliable and non-intrusive logging into a database table using pseudo-autonomous transactions via the dblink extension. Logs are written in a way that survives even if the calling transaction is rolled back.
To optimize performance, the dblink connection is cached using the pg_variables extension and reused throughout the session.
⚠️ Note: Each session may open up to 1 additional connection (due to
dblink). Adjust yourmax_connectionssetting accordingly.
License
The pgelog extension available under the license similar to PostgreSQL.
Prerequisites
-
PostgreSQL or PostgresPro 11+
-
Extensions:
-
Passwordless dblink to localhost
For pgelog to work, regular users must be able to connect to localhost via dblink without a password.
Update pg_hba.conf:
# TYPE DATABASE USER ADDRESS METHOD
local all all peer
Reload configuration:
SELECT pg_reload_conf();
Test dblink():
SELECT * FROM dblink(
'host=localhost port=5432 dbname=' || current_database() || ' user=' || current_user,
$$SELECT 'It works!'$$
) AS t(result text);
Should return:
It works!
Installation
Typical installation procedure may look like this:
- Download and extract:
$ wget https://github.com/anfiau/pgelog/archive/refs/tags/v1.0.2.tar.gz
$ tar -xzf pgelog-1.0.2.tar.gz
$ cd pgelog-1.0.2
$ chmod +x find-pg_config.sh
- Install for the latest PostgreSQL version detected:
$ sudo make install
Or install for a specific version (for example, set path to pg_config of 11):
$ sudo make PG_CONFIG=/usr/pgsql-11/bin/pg_config install
- Enable in your database:
CREATE EXTENSION IF NOT EXISTS dblink;
CREATE EXTENSION IF NOT EXISTS pg_variables;
CREATE EXTENSION pgelog;
Objects
Table: pgelog_params
Stores configuration parameters
| Column | Type | Description | |–––––––|–––––|———––| | param_name | TEXT | Name of parameter | | param_value | TEXT | Value of parameter |
Table: pgelog_logs
Main log storage
|Column |Type |Description | |–––––––|–––––––|———––| | log_stamp | TIMESTAMP | Timestamp (clock_timestamp()) | | log_type | TEXT | Log level: FAIL, WARN, INFO, etc. | | log_func | TEXT | Source function or context | | phase | TEXT | Phase label (e.g., 1, 2.a) | | log_info | TEXT | Message body | | xact_id | TEXT | Transaction ID by pg_current_xact_id() or txid_current() | | sqlstate | TEXT | SQLSTATE code | | sqlerrm | TEXT | Error message (SQLERRM) | | conn_name | TEXT | dblink connection name used |
View: pgelog_vw_logs
Main log storage with timing
| Column | Type | Description | |–––––––|–––––––|———––| | log_stamp | TIMESTAMP | Timestamp (clock_timestamp()) | | log_type | TEXT | Log level: FAIL, WARN, INFO, etc. | | log_func | TEXT | Source function or context | | phase | TEXT | Phase label (e.g., 1, 2.a) | | log_info | TEXT | Message body | | xact_id | TEXT | Transaction ID by pg_current_xact_id() or txid_current() | | time_s | INTEGER | Time in seconds since the previous log entry for the same xact_id | | delta_t | INTEGER | Time in seconds since first log entry for the same xact_id (~ time from function call to this phase) | | sqlstate | TEXT | SQLSTATE code | | sqlerrm | TEXT | Error message (SQLERRM) | | conn_name | TEXT | dblink connection name used |
Usage Examples
Simple
- Write a log entry
SELECT pgelog_to_log('SQL', 'standalone', 'Test of logging by pgelog', '1');
- Read latest entry
SELECT log_stamp, log_info
FROM pgelog_logs
ORDER BY log_stamp DESC
LIMIT 1;
- Result:
| log_stamp | log_info | |—————————|—————————| | 2025-09-15 10:54:41.907 | Test of logging by pgelog |
Logging Exception in PL/pgSQL
- Execute PL/pgSQL block raising an exception
DO $$
DECLARE
v_Result FLOAT;
v_Divisor INTEGER := 0;
v_Log_Func TEXT := 'PL/pgSQL block';
v_Phase TEXT;
v_Exc_1 TEXT;
v_Exc_2 TEXT;
v_Exc_3 TEXT;
v_Exc_4 TEXT;
v_SQLSTATE TEXT;
v_SQLERRM TEXT;
BEGIN
-- 1) First phase
v_Phase := '1)';
v_Result := 1.0 / v_Divisor;
-- 2) Second phase
v_Phase := '2)';
PERFORM pgelog_to_log('INFO', v_Log_Func,
'v_Divisor='||COALESCE(v_Divisor::TEXT,'NULL'), v_Phase);
-- Catch exceptions
EXCEPTION
WHEN OTHERS THEN
GET STACKED DIAGNOSTICS
v_Exc_1 = MESSAGE_TEXT
,v_Exc_2 = PG_EXCEPTION_DETAIL
,v_Exc_3 = PG_EXCEPTION_HINT
,v_Exc_4 = PG_EXCEPTION_CONTEXT
,v_SQLSTATE = RETURNED_SQLSTATE
;
v_SQLERRM := format(
'%s%s%s%s%s'
,COALESCE(NULLIF(v_Exc_1,'')||'; ','')
,COALESCE(NULLIF(v_Exc_2,'')||'; ','')
,COALESCE(NULLIF(v_Exc_3,'')||'; ','')
,COALESCE(NULLIF(v_Exc_4,'')||'; ','')
,COALESCE(NULLIF(SQLERRM::TEXT,'')||'; ','')
);
PERFORM pgelog_to_log('FAIL', v_Log_Func
,format(
'%s failed for v_Divisor=%s'
,v_Log_Func
,COALESCE(v_Divisor::TEXT,'NULL')
)
,v_Phase, v_SQLERRM, v_SQLSTATE);
RAISE EXCEPTION '%', v_SQLERRM
USING ERRCODE = SQLSTATE;
END $$;
- Read latest entry with ‘FAIL’ log_type
SELECT L.log_info, L.sqlerrm
FROM pgelog_logs L
WHERE L.log_type = 'FAIL'
ORDER BY L.log_stamp DESC
LIMIT 1;
- Result:
|log_info | sqlerrm | |———————–|———| |PL/pgSQL block failed for v_Divisor=0|division by zero PL/pgSQL; function inline_code_block line 16 at assignment; division by zero¶ |
Configuration Parameters
Use pgelog_set_param() and pgelog_get_param():
SELECT pgelog_get_param('pgelog_ttl_minutes'); -- get old value = 1440
SELECT pgelog_set_param('pgelog_ttl_minutes', '2880'); -- set new value = 2880
SELECT pgelog_get_param('pgelog_ttl_minutes'); -- get new value = 2880
| Parameter | Default | Description | |–––––––––––––|———––|———––| | pgelog_port | ‘5432’ | Database port | | pgelog_pgv_transactional | ‘y’ | Use pg_variables in transactional mode | | pgelog_assign_xact_id | ‘n’ | Force xact ID assignment for read-only tx | | pgelog_is_active | ‘y’ | Global logging toggle | | pgelog_pgv_package | ‘pgelog’ | pg_variables package name | | pgelog_ttl_minutes | ‘1440’ | Retention time in minutes (default: 1 day) | | pgelog_log_clean_call | ‘y’ | Log calls to pgelog_clean_log()? | | pgelog_log_init_call | ‘n’ | Log calls to pgelog_init()? |
You can store your own custom parameters in pgelog_params by pgelog_set_param() — they persist across backups.
Session-Level Control of Logging
Override global logging settings per session:
- pgelog_enable_locally() – Enable logging only in this session
- pgelog_disable_locally() – Disable logging only in this session
Example:
SELECT pgelog_disable_locally(); -- Turn off logging for current session
Clean Up Old Logs
Remove logs older than N minutes:
- Delete logs older than 60 minutes:
SELECT pgelog_clean_log(60);
- Or use default TTL:
SELECT pgelog_clean_log();
- Schedule it via cron (for example run daily cleanup at 2:00 AM):
0 2 * * * psql -U postgres -d mydb -c "SELECT pgelog_clean_log();"
Functions
| Function | Returns | Description | |——————————|————|———––| | pgelog_to_log(log_type,log_func,log_info,phase,sqlerrm,sqlstate) | BOOLEAN | Write a log entry | | pgelog_init() | BOOLEAN | Initialize dblink (auto-called) | | pgelog_close() | BOOLEAN | Close dblink manually | | pgelog_clean_log(minutes) | BOOLEAN | Remove old records | | pgelog_set_param(name,val) | VOID | Set config param | | pgelog_get_param(name) | TEXT | Get config param | | pgelog_delete_param(name) | VOID | Delete config param | | pgelog_enable() / disable() | BOOLEAN | Toggle global logging | | pgelog_enable_locally() / disable_locally() | BOOLEAN | Toggle session logging |
Exception Handling
All exceptions in pgelog functions are caught silently to avoid disrupting calling code. A NOTICE is raised with error details.
This ensures logging never causes unintended rollbacks.
PGXN
This extension is available on PGXN. Install it with:
pgxn install pgelog